INVENTORY PLANNING ANALYSIS OF RAW MATERIALS FOR ANIMAL FEED USING THE MRP LOT SIZING TECHNIQUE AT CV. XYZ
Keywords:
Inventory, Least Unit Cost, Least Total Cost.Abstract
Material Requirement Planning (MRP) is a system used to organize and supervise production chain management, with the aim of managing the inventory of raw materials, components, and finished products in the manufacturing or production process. CV. XYZ has problems related to production delays caused by lack of raw material inventory. This study aims to ensure the right ordering schedule and minimize ordering costs at CV. XYZ by using the MRP method and lot sizing techniques, where the lot sizing techniques used are Least Unit Cost (LUC) and Least Total Cost (LTC). Based on the results of MRP calculations using the Least Unit Cost lot sizing technique, the total cost is Rp2,235,127 while the MRP method with Least Total Cost is Rp. 1,936,651. Thus, the MRP method with Least Total Cost has a smaller total cost than Least Unit Cost, so this is an effective solution in planning the inventory of animal feed raw materials at CV. XYZ.
Downloads
References
Isnantoro, M. R., & Hariastuti, N. L. P. (2023). Analisa Penggunaan Lot Sizing dalam Perencanaan Persediaan Bahan Baku dengan Menggunakan Metode Material Requirement Planning di Pt. Xyz. Prosiding Seminar Nasional Teknologi Industri Berkelanjutan III, 3(Senastitan Iii).
Kumar, P., Gupta, M. M., Yadav, D., & Kumar, V. (2024). Benefits of preservation technology, reworking, and waste management in sustainable production-inventory system in inflationary environment. FRONTIERS IN INDUSTRIAL AND APPLIED MATHEMATICS: FIAM2022, 3081(1), 080002. https://doi.org/10.1063/5.0196349
Mevia, I. P. A., & Purnomo, H. (2023). Analisis Perencanaan Dan Pengendalian Persediaan Bahan Baku Terhadap Proses Produksi Di Ras Design Interior. Simposium Manajemen dan Bisnis II, 2(1), 1617–1629.
https://proceeding.unpkediri.ac.id/index.php/simanis/article/view/3387
Pratama, E. P. J., Mawadati, A., & Susetyo, J. (2023). Usulan Perbaikan Perencanaan Persediaan Bahan Pakan Konsentrat Hewan Ternak Sapi Menggunakan Metode Lot for Lot (Lfl) Least Unit Cost (Luc) Dan Least Total Cost (Ltc) Pada Ud. Sadewa Farm. Jurnal REKAVASI, 11(1), 66–73.
Sari, L. A., & Achmad Fauzi. (2023). Analisa Efisiensi Biaya Persediaan Headset Electric Yc D-2018 Menggunakan Metode Deterministik Dinamis Pada Pt Aerofood Indonesia Unit Ists. Jurnal Akuntansi dan Manajemen Bisnis, 3(1), 95–103. https://doi.org/10.56127/jaman.v3i1.665
Subekti, & Yevita Nursyanti. (2023). Optimasi Persediaan Dengan Pendekatan Deterministik Dinamis Pada Industri Manufaktur. Jurnal Teknologi dan Manajemen Industri Terapan, 2(I), 8–18. https://doi.org/10.55826/tmit.v2ii.83
L. Gozali, Andres, and R. Handika, “Usulan Penentuan Teknik Lot Sizing Terbaik dengan Minimisasi Biaya dalam Perencanaan dan Pengendalian Kebutuhan Canvas EP 200 Conveyor Belt di PT. XWZ,” Jurnal Kajian Teknologi, vol. 9, no. 2, pp. 132–144, Jul. 2013.
S. M. Javadi, S. J. Sadjadi, E. Teimoury, dan A. Makui, “Material requirements planning with a novel lot sizing method and a new algorithm for production scheduling,” Scientific Reports, vol. 15, p. 27637, Jul. 2025, doi: 10.1038/s41598-025-13197-8.
A. Segerstedt, B. Abdul-Jalbar, dan B. Samuelsson, “Reformulated Silver-Meal and Similar Lot Sizing Techniques,” Axioms, vol. 12, no. 7, p. 661, 2023, doi: 10.3390/axioms12070661.
R. Kian, E. Berk, Ü. Gürler, H. Rezazadeh, dan B. Yazdani, “The effect of economies-of-scale on the performance of lot-sizing heuristics in rolling horizon basis,” International Journal of Production Research, published online Feb. 26, 2020, doi: 10.1080/00207543.2020.1730464.
B. Zhu, Y. Zhang, K. Ding, F. T. S. Chan, J. Hui, dan F. Zhang, “Lot-sizing decisions for material requirements planning with hybrid uncertainties in a smart factory,” Advanced Engineering Informatics, vol. 51, p. 101527, 2022, doi: 10.1016/j.aei.2022.101527.
M. H. Jabeur et al., “Optimizing integrated lot sizing and production scheduling in flexible flow line systems with energy scheme: A two-level approach based on reinforcement learning,” Computers & Industrial Engineering, 2024, doi: 10.1016/j.cie.2024.110095.
S. Thevenin, Y. Adulyasak, dan J.-F. Cordeau, “Material Requirements Planning Under Demand Uncertainty Using Stochastic Optimization,” Production and Operations Management, vol. 30, no. 2, pp. 475–493, 2021, doi: 10.1111/poms.13277.
P. Renna, “Switch-Off Policy in Flow Lines with Dynamic Fractional Task Assignation,” Sustainability, vol. 17, no. 9, Art. no. 4096, 2025, doi: 10.3390/su17094096.
S. Thevenin, Y. Adulyasak, and J.-F. Cordeau, “Material Requirements Planning Under Demand Uncertainty Using Stochastic Optimization,” Production and Operations Management, vol. 30, no. 2, pp. 475–493, 2021, doi: 10.1111/poms.13277.
G. Garcia-Garcia, Y. Singh, and S. Jagtap, “Optimising Changeover through Lean-Manufacturing Principles: A Case Study in a Food Factory,” Sustainability, vol. 14, no. 14, Art. no. 8279, 2022, doi: 10.3390/su14148279.
B. Zhu, Y. Zhang, K. Ding, F. T. S. Chan, J. Hui, and F. Zhang, “Lot-Sizing Decisions for Material Requirements Planning with Hybrid Uncertainties in a Smart Factory,” Advanced Engineering Informatics, vol. 51, Art. no. 101527, 2022, doi: 10.1016/j.aei.2022.101527.
